Loading... 这是参见VPLEX培训做的笔记,简单整理了下 VPLEX Config guide <a href="https://www.crazycen.com/usr/uploads/2014/11/Image.png"><img style="display: inline; border: 0px;" title="Image" src="https://www.crazycen.com/usr/uploads/2014/11/Image_thumb.png" alt="Image" width="340" height="334" border="0" style=""></a> Metro <a href="https://www.crazycen.com/usr/uploads/2014/11/Image1.png"><img style="display: inline; border: 0px;" title="Image(1)" src="https://www.crazycen.com/usr/uploads/2014/11/Image1_thumb.png" alt="Image(1)" width="612" height="363" border="0" style=""></a> +++++++++++++++++++++++ VPLEX Serveice IP:128.221.252.2/255.255.255.224 +++++++++++++++++++++++ <b>cluster1:</b> sudo /opt/emc/VPlex/tools/ipconfig/changehostname.py -n VPLEX-Mhmt-Pod1 set managemen server ip management-server set-ip -i 192.168.1.100:255.255.255.0 -g 192.168.1.1 eth3 configuration connect-local-directors ll /engines/**/directors/ version configuration system-setup ll /engines/**/ports -p ++++++++++++++++++++++++++ <b>switch</b> create zone back and front ++++++++++++++++++++++++++ meta-volume create -n Pod1_Meta -d configuration metadata -backup configuration register-product configuration enable-front-end-ports =------------------------------------------------- <b>cluster 2:</b> configuration system-setup configuration sync-time ##sync time with cluster1 --------------------------------------------------- <b>cluster1:</b> configuration complete-system-setup ---------------------------------------------------- <b>cluster2:</b> configuration complete-system-setup ----------------------------------------------------- +++++++++++++++ <b>WAN switch</b> any BE port ZONE with all remote Port +++++++++++++++ <b>cluster2:</b> configuration join-cluster +++++++++++++++++++++++ <b>cluster1and2</b> storage-volume claim -n pod1loging -d VPD:xxxx ###create 2 volume , and create a RAID-1 logging volume extent create -d volume1,volume2 ls /cluster/cluster-1/storage-elements/extents/ cd /cluster/cluster-1/system-volume logging-volume create -n pod1loging -g raid-1 -e <extent_name> <extent_name> ++++++++++++++++++++++++++++++++++++++++++++ <b>create distributed devices</b> cluster1 and cluster mirror install witness ovf set ip +++++++++++ cluster1and2 configuration cw-vpn-configure -i <ip> cluster -witness ls /cluster-witness/ cluster-witness enable +++++++++++++++++ you can login unisphere for vplex You must check all status is ok 。 <a href="https://www.crazycen.com/usr/uploads/2014/11/image.png"><img style="display: inline; border: 0px;" title="image" src="https://www.crazycen.com/usr/uploads/2014/11/image_thumb.png" alt="image" width="808" height="394" border="0" style=""></a> Last modification:October 6, 2023 © Allow specification reprint Support Appreciate the author AliPayWeChat Like 如果觉得我的文章对你有用,请随意赞赏
2 comments
来看看博主!
你的博客小清新啊!