VPLEX Metro配置流程

这是参见VPLEX培训做的笔记，简单整理了下

VPLEX Config guide

Metro

+++++++++++++++++++++++

VPLEX Serveice

IP:128.221.252.2/255.255.255.224

+++++++++++++++++++++++

cluster1:

sudo /opt/emc/VPlex/tools/ipconfig/changehostname.py -n VPLEX-Mhmt-Pod1

set managemen server ip

management-server set-ip -i 192.168.1.100:255.255.255.0 -g 192.168.1.1 eth3

configuration connect-local-directors

ll /engines/**/directors/

version

configuration system-setup

ll /engines/**/ports -p

++++++++++++++++++++++++++

switch

create zone back and front

++++++++++++++++++++++++++

meta-volume create -n Pod1_Meta -d

configuration metadata -backup

configuration register-product

configuration enable-front-end-ports

=-------------------------------------------------

cluster 2:

configuration system-setup

configuration sync-time ##sync time with cluster1

---------------------------------------------------

cluster1:

configuration complete-system-setup

----------------------------------------------------

cluster2:

configuration complete-system-setup

-----------------------------------------------------

+++++++++++++++

WAN switch

any BE port ZONE with all remote Port

+++++++++++++++

cluster2:

configuration join-cluster

+++++++++++++++++++++++

cluster1and2

storage-volume claim -n pod1loging -d VPD：xxxx ###create 2 volume , and create a RAID-1 logging volume

extent create -d volume1,volume2

ls /cluster/cluster-1/storage-elements/extents/

cd /cluster/cluster-1/system-volume

logging-volume create -n pod1loging -g raid-1 -e <extent_name> <extent_name>

++++++++++++++++++++++++++++++++++++++++++++

create distributed devices

cluster1 and cluster mirror

install witness ovf

set ip

+++++++++++

cluster1and2

configuration cw-vpn-configure -i <ip>

cluster -witness

ls /cluster-witness/

cluster-witness enable

+++++++++++++++++

you can login unisphere for vplex

You must check all status is ok 。